- Usb Controller Driver Not Installing Properly Download
- Pc Usb Controller Not Working
- Usb Drivers Not Working
- Download Usb Controller Driver
- Usb Controller Driver Not Installing Properly Windows 10
- Usb Controller Driver Not Installing Properly Windows 7
Universal Serial Bus (USB) Controller is not installed I have Microsoft Window Xp Professional wtith version 2002 installed, Having Intel(R) 8.0 Family Motherboard (82845G Graphics Controller, Intel(r) 82802 Firmware Hub Device), other hardware and software device are working properly.
If when you run the Windows USB Troubleshooter, you see an error message The USB Controller is in a failed state or is not currently installed then this post offers some troubleshooting suggestions that may help you. After a laptop is updated, especially a Windows 10 laptop, or even sometimes during troubleshooting it, a few applications may stop working, while some might even get uninstalled. USBs often malfunction or are not recognized by the system.
The USB Controller is in a failed state or is not currently installed
Sometimes, Notebook users face this problem too. The device does appear in the Device Manager option, but usually under the ‘Other Devices’ menu, along with an exclamation mark, signifying that it’s not currently functioning. This message will also prevent the troubleshooter from functioning properly, and installing the device manually is usually not an option. The reasons behind this could be multiple – from malfunctioning hardware to problematic USB devices. When Windows does not recognize the USB Controller, and says it is in a failed state, or not installed, these are the some of the solutions you can try:
1] Reboot
Rebooting it is obviously the first thing you need to try – as this has been known to solve such problems.
2] Updating USB drivers
You should update the driver even if your USB is not malfunctioning. You can install the latest edition of the USB driver for your system. Please check the manufacturer’s website or guidelines for updating the driver according to your system.
In some cases, the drivers might not be compatible with the version of the operating system. In such a situation, you could run the driver software in Compatibility Mode.
3] Uninstall 3.0 Flash Drive
Try uninstalling 3.0 Flash Drive from the BIOS/ UEFI settings. And see, if the 2.0 edition helps. You can then enable the 3.0 version later once the troubleshooting is done.
4] Use the Device Manager
You should always use a Device Manager to scan for major hardware changes.
Select ‘Windows’ + R and then type devmgmt.msc in Run. You then need to hit ‘OK’, and that will take you to Device Manager. In the Device Manager, click View and then go to Show Hidden Devices.
This will bring you a pop-up list of the devices you need to see, and you will find the Unknown USB Device option. Right Click on it, and then click Uninstall
For best results, uninstall all USB devices, and then reboot the system. When Windows starts again, chances are it will let you inquire about your USB preferences, and let you install the drivers back – or else you could use the Scan for Hardware changes option.
5] Disable Selective Suspend
Sometimes, these solutions do not help, in cases of extensive problems. Interestingly, in Windows 10, there is a Selective Suspend feature, which suspends a specific port, without affecting the other ports. This feature is also a very handy laptop essential as it saves a lot of power.
In case, none of the above options work for you, disable the Selective Suspend feature, which will not allow your computer to suspend any USB devices. You will find the setting in Advanced Power Options.
6] Run Hardware Troubleshooter
Microsoft’s built-in troubleshooters are able to automatically detect if a device is not working in alignment with the system. Here’s what you can do:
Go to Control Panel and then choose Troubleshooting, and then View All. This will take you to a list of possible issues, and you need to choose what the exact problem you’re facing.
Select the Hardware & Devices Troubleshooter, click Advanced and choose Apply Repairs Automatically, and then click Next. The troubleshooter will detect the issues, and you can identify from among the list.
You can also access the Troubleshooters from the Windows 10 Settings Troubleshooters page.
We hope it solves your issue.
Related Posts:
Mar. 19, 2019 / Updated by Bessie Shaw to Windows 10
Are you pulling your hair out with USB not workingafter theWindows 10 Update (Creators Update/Fall Creators Update 1709/Spring Creators Update 1803)? Recently, various Windows 10 Update USB problems come into light, including “USB device is not recognized after the Windows 10 Update”, “USB device stops working after installing the Windows 10 update”, etc. To fix the Windows 10 Update USB not working glitch, you could try the following four methods, also applied to Windows 10 Creators Update and Windows 10 Fall Creators Update.
1. Update USB Drivers to Fix USB Not Working after Windows 10 Update
Most USB problems are due to outdated USB drivers. You encounter the USB device not recognized after the Windows 10 Update because your USB driver needs an update. You could use Windows Update to do it, but it will be quite a time-consuming process and you might not successfully install the USB driver at last. Alternatively, you could try a professional driver download utility tool like Driver Talent, which could automatically download the Windows 10 Update USB driver in seconds. You don’t need to spend a lot of time searching for it manually.
Click the button below to get Driver Talent directly.
You could easily use Driver Talent to download all the USB drivers for Windows 10, such as Intel USB 3.0 drivers, Etron USB drivers, etc.
Usb Controller Driver Not Installing Properly Download
Here are 3 steps to download the suitable USB drivers to troubleshoot your USB not working or USB device not recognized after Windows 10 Update issue.
Step 1. Scan Your PC
Launch Driver Talent. Click “Scan” to identify your outdated, broken, damaged, corrupted or missing USB drivers.
Step 2. Download USB Drivers for Windows 10 Update
Click 'Peripheral Drivers', and then select 'USB Drivers'. The USB drivers that meet your specifications will appear and click “Install” to install the exact USB drivers for Windows 10.
Step 3. Reboot Your PC
Once installed, reboot your PC for the USB driver updates to come into effect.
Note: Bear in mind that back up your drivers with Driver Talent prior to installing new Windows 10 Update USB drivers in case of driver crashes.
In addition, Drive Talent provides other premium features, like drivers restore, drivers uninstall, system restore, drivers pre-download for another PC, PC Repair, hardware detection, VR support check and PC speed up, etc.
See Also:How to Fix USB Tethering Not Working in Windows 10, 8.1, 8, 7
Method 2. Change Power Management Settings for USB Controller to Resolve USB Device Not Working after Installing Windows 10 Update
You could also change the Power Management Settings for USB controllers to repair your Windows 10 Update USB not working or USB device not recognized issue. Here’s how.
Step 1. Simply open Device Manager
Step 2. Find Universal Serial Buscontrollers section and expand it
Step 3. Right click on the driver USB Root Hub and choose Properties
Step 4. Head to the Power Management tab
Step 5. Make sure that the Allow the computer to turn off this device to save power check box is not checked. If it’s checked, uncheck it
Step 6. Click OK to save the changes
Step 7. Repeat the process for all USB Root Hub drivers
Step 8. Reboot your PC
Method 3. Uninstall the USB Controller
The USB controller sometimes can also be a culprit for the USB not working or not recognized after the Windows 10 Update issue. Follow these steps below to uninstall the USB controller:
Step 1. Open the Device Manager
See Also:How to Find Device Manager on Windows 10
Step 2. Find Universal Serial Bus controllers and expand it
Step 3. Right-click the driver in the Universal Serial Bus section and click Uninstall and then OK
Step 4. Repeat the steps for all drivers in the Universal Serial Bus section
Pc Usb Controller Not Working
Step 5. Reboot your PC
Method 4. Modify the Registry Settings to Fix USB Not Recognized after Windows 10 Update
If none of the aforementioned methods works, you could try to modify the USB related Registry settings to resolve the USB not recognized after the Windows 10 Update problem. Follow these steps:
Step 1. Press Windows key + R to open the Run dialog
Step 2. Type regedit and press Enter
Step 3. Navigate to the following path:
HKEY_LOCAL_Machine > SYSTEM > CurrentControlSet > Services > USB
Step 4. If the USB key does not exist into the list, then create a new key USB under Services. Now create a new DWORD value under the key that you’ve just created
Step 5. Keep the USB key selected and right-click on the blank space at the right pane
Step 6. Select New >DWORD value from the context menu
Usb Drivers Not Working
Step 7.Rename this newly created DWORD value as DisableSelectiveSuspend
Download Usb Controller Driver
Step 8. Right-click on DisableSelectiveSuspend and select Modify
Step 9. Put 1 in Value data field and then click OK
Step 10. Reboot your PC
If you know other workaround for the USB not working after Windows 10 Update (Creators Update/Fall Creators Update 1709/Spring Creators Update 1803), please make sure to share with us in the comment section below.
Usb Controller Driver Not Installing Properly Windows 10
| 360 Total Security Business | Driver Talent for Network Card |
| Deploy critical protection to secure your corporate data | Download & Install Network Drivers without Internet Connection |
| 30-day Free Trial | Free Download |